Solar Repair HQ Get help

Solar inspection

Solar system inspection in West Michigan

Buying a home with panels on it? Bill crept back up? Failed the city's final inspection, or your installer is gone and you're not sure what you've got? We inspect the system and tell you plainly what it's worth and what it needs.

  • Production check against what the system should make
  • Wiring, racking, inverter and roof penetrations
  • Permit and utility approval history
  • Warranty status and who to claim from

Book an inspection

Tell us about the system. We'll call you, usually within one business day.

No cost to ask. We never sell your information. Privacy

Three different things called a "solar inspection"

  1. The city's final inspection. A local electrical inspector checks a new installation before the utility will let it run. You can't hire us for that one, but we fix whatever it flagged and get the system re-inspected.
  2. An independent system inspection. We check an existing system's health, safety and production for you, the owner or buyer.
  3. A roof inspection before solar. We check whether your roof should be replaced before panels go on it.

1. Passing the final inspection

The inspector checks that the system meets the electrical code for solar, which is Article 690 of the National Electrical Code as adopted in Michigan, and that it matches the approved plans. Common reasons a system fails:

  • Missing or wrong warning labels and placards
  • Rapid shutdown that's missing or doesn't work
  • Grounding and bonding problems on the racking
  • Loose or unprotected wiring, unfinished conduit
  • Disconnect switch missing or in the wrong place
  • Breaker sizing or the solar connection at the main electrical panel

If your installer left before passing it, see panels that were never turned on.

2. An independent inspection: what we check

  • Production: what the system is making against what it should make for its size, orientation and the season.
  • Inverters, microinverters and optimizers: errors, failed units and firmware.
  • Wiring and connectors: damage, corrosion, loose connections and critter damage under the panels.
  • Racking and roof attachments: loose mounts, flashing and signs of leaks.
  • Panels: cracks, hot spots, discoloration and shading that has grown since the install.
  • Safety: disconnects, rapid shutdown, labels and grounding.
  • Paperwork: the permit and final inspection, utility approval, and the warranty status of each piece of equipment.

You get a written summary with photos: what works, what doesn't, what's urgent, and what each fix would cost.

When to get one

  • You're buying a house with solar. Find out before closing whether the system is owned, leased or financed, whether it was ever permitted and approved, and whether it actually works. A lease or loan on the system can follow the house.
  • Your bill went back up. Panels lose output slowly, so a sudden change usually means a failed inverter, a tripped disconnect, or monitoring that went offline and hid a problem. More on why panels stop working.
  • Your installer is gone. The first step to taking over service is knowing what's on the roof. What happens when your solar company goes out of business.
  • It's been years. Loose connections, critter damage and failing optimizers are common on systems from the 2014 to 2018 wave.

3. A roof inspection before solar

Panels last 25 years or more, often longer than the shingles under them. Taking panels off to reroof later costs money, so it's worth knowing first. We check the roof's age and condition, the decking, and where the mounts would go. If the roof has less than about ten years left, we'll tell you to replace it first. If you already have panels and need a new roof, see removal and reinstall.

How it works

  1. Tell us what's wrong. Two minutes on the form above.
  2. We call you. We'll ask about your system and set up a visit.
  3. We find the problem and quote the fix before any work starts.
  4. Your panels make power again. No more paying for a system that sits there.

We work on systems other companies abandoned

When an installer goes out of business, the homeowner is often left with no one to call: no monitoring, no workmanship warranty, sometimes a permit that never got its final inspection. The panels and inverters themselves usually still carry the manufacturer's warranty, and we can help you use it.

What to do if your solar company is gone →

Common questions

What does a solar system inspection include?

A production check against what the system should make; the inverters, wiring, connectors, racking, panels and roof attachments; safety equipment like disconnects and rapid shutdown; and the permit, utility approval and warranty history.

What does the city check at a solar final inspection?

That the installation meets the electrical code for solar and matches the approved plans: labels and placards, rapid shutdown, grounding and bonding, wiring and conduit, the disconnect, and the connection at the main electrical panel.

I'm buying a house with solar. What should I check?

Whether the system is owned, leased or financed, whether it was permitted and approved by the utility, whether it is producing, and who services it. A lease or loan can follow the house. We can inspect it before closing.

Should I replace my roof before installing solar?

If the roof has less than about ten years left, usually yes. Panels last 25 years or more, and removing them later to reroof adds cost.